Ductile iron single range flange
Universal straight fittings, stepped fittings and flange adapters for cast iron, ductile iron, steel, uPVC and asbestos cement pipes.
Ductile iron pe pipe single rang
Working pressures may vary from 10 to 16 bar depending on the application. The flange design of the adaptors is suitable for various international variations like DN, BS and ANSI.
Ductile iron wide range flange a
Flange adaptor couplings provide an effective means for inserting a flange into a pipeline for connection to another flanged component or valve. These adaptors are suitable for use in potable water; non-potable water and wastewater pipelines.
WHITE BAND expansion joints
The main body of silicone rubber joints for food production enterprises is made of nylon cord as the reinforcing material, which is vulcanized under heating and pressure conditions. Food grade rubber joints are used in cold water,
Dual Card Pipe Connectors
Pipe repair clamp is a kind of pipe plugger for repairing pipes, also known as Hafjoint, the upper and lower parts are sealed with sealing strips and fastened as a whole by bolts and worms.

Introduction of large tie rod transverse corrugated compensator.

Aug-22-18 Visits:234

Large tie rod transverse corrugated compensator can compensate the lateral displacement of the bent pipe section and the angular displacement of small value, usually not used to compensate the angular displacement. The big tie rod corrugated compensator is composed of taking over two bellows and big tie rod and other parts. It can absorb the lateral displacement in any plane of the pipe system. Displacement spherical nut around the spherical washer rotation, while the tie rod also has the ability to withstand internal pressure thrust. The compensator two bellows, long intermediate receiver and large tie rod and other parts, large tie rod corrugated compensator can absorb the lateral displacement in any plane of the pipe system. Displacement spherical nut around the spherical washer rotation, while the tie rod also has the ability to withstand internal pressure thrust.

Use: The large tie rod transverse corrugated compensator can compensate the transverse displacement and angular displacement of the bent pipe section.

Pressure level: 0.1Mpa-2.5Mpa

Connection mode: 1、Flange connection type 2、Takeover connection type

Sanitary food grade rubber expansion joint

Metal hose should have what performance?

Product knowledge

Introduction of large tie rod transverse corrugated compensator.

Leave Your Message