Ductile iron single range flange
Universal straight fittings, stepped fittings and flange adapters for cast iron, ductile iron, steel, uPVC and asbestos cement pipes.
Ductile iron pe pipe single rang
Working pressures may vary from 10 to 16 bar depending on the application. The flange design of the adaptors is suitable for various international variations like DN, BS and ANSI.
Ductile iron wide range flange a
Flange adaptor couplings provide an effective means for inserting a flange into a pipeline for connection to another flanged component or valve. These adaptors are suitable for use in potable water; non-potable water and wastewater pipelines.
WHITE BAND expansion joints
The main body of silicone rubber joints for food production enterprises is made of nylon cord as the reinforcing material, which is vulcanized under heating and pressure conditions. Food grade rubber joints are used in cold water,
Dual Card Pipe Connectors
Pipe repair clamp is a kind of pipe plugger for repairing pipes, also known as Hafjoint, the upper and lower parts are sealed with sealing strips and fastened as a whole by bolts and worms.

Metal hose metal material deformation joints installation and use of common problems.

Jul-22-30 Visits:326

Metal hose in the pipeline installation role is very large. In the installation and use of the first to test its specifications, model specifications and pipeline configuration to meet the design requirements. To meet the design requirements. Should pay special attention to the inner pad specifications of the metal hose, so that the orientation of the inner pad specifications and the direction of the material flow properties, door hinge tube compensator door hinge rotation plane should be consistent with the offset rotation plane.
　　Metal hose metal compensator assembly according to the requirements of the centrifugal fan machine and equipment process information.
　　Centrifugal fan and metal compensator coupling, metal compensator may not bear the role of external forces and tensile force.
After the metal compensator is assembled, the inner nut of the metal compensator should be loosened, and the support rod must not be removed. In addition to this, non-metallic material textile skin should have Rashen capacity, other amount should reach to avoid metal material deformation joints by the external force role of pulling. Rashen, resulting in ruin.

What is the role of rubber flexible joints in pipeline?

Installation and use of double sphere rubber joints.

Product knowledge

Metal hose metal material deformation joints installation and use of common problems.

Leave Your Message