Rubber flexible connection working conditions

Dec-22-22 Visits:122

Rubber soft connection is the new product of pump, gate valve, pipeline and other facilities and pipeline connection, according to the full screw to connect the two to each other, so that it becomes a total, and has a certain offset, that can be in the assembly and maintenance, according to the on-the-spot assembly specifications to carry out the adjustment, in operation, can transmit the radial push force back to the full pipeline system software. Its characteristics are: wear-resistant, durable, application environment temperature below 150 ℃, usually used in the sea, talk, cold and hot water, domestic water, domestic sewage treatment, oil, wholesale refined oil, gas, liquefied gas and other working conditions.

The key of rubber soft connection is to digest and absorb or compensate the horizontal offset of the pipeline in one or more directions, the pipeline compensator should be applied in pairs, a single spherical compensator has no compensation capacity and can be used as a universal joint of the pipeline. Basically add flange plate pipe hoop and transmission screw and become, the sub-category of compensation joint head is not the same is its compensation refers to the amount of control during the whole process of assembly and disassembly, once all the screws are twisted, it is rigidly connected, can transmit the axial force, and thus maintain the gate valve, pump and other machinery and equipment.
The rubber flexible connection is suitable for pipes connected with flanges on both sides. When assembling, adjust the assembly length of both sides of the goods and the flange. The top angle is evenly tightened to the foot bolt so that it becomes a whole with a certain deviation. When assembly and maintenance are convenient, it can be modified according to the site size. Radial drive force can be transmitted to all pipes when operating.

Product knowledge

Rubber flexible connection working conditions

Leave Your Message